for EVGA GQ/G2/G3/P2/T2 & Seasonic FOCUS 2x 8 Pin to Mini 12 Pin GPU Cable

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• 🔹 RTX 30 SERIES FOUNDERS EDITION ONLY — NOT RTX 40 / 12VHPWR ⚠️ This cable is designed for NVIDIA RTX 30 Series Founders Edition GPUs (RTX 3090/3080/3070/3060/3050 FE) with a Mini 12-pin power port. ⚠️ It is NOT compatible with RTX 40 Series (12VHPWR 16-pin) or any GPU using a 16-pin connector. The 12-pin and 16-pin are physically and electrically different. Do not attempt to use this cable on an RTX 40 card.
• 🔹 ONLY FOR LISTED EVGA & SEASONIC PSU MODELS — VERIFY BEFORE ORDERING ⚠️ This cable is exclusively for the specific EVGA and Seasonic PSU models listed in the compatibility section (including EVGA GQ/T2/P2/G2/G3/NEX-G/NEX-B/B1/B2/B3/BQ/GS series, excluding 1000PS/850GS/1050GS; and Seasonic X/SS/PRIME/FOCUS/CORE/M12II Evo series as listed). ⚠️ Using this cable with an unlisted PSU (including Corsair or other brands) may burn or damage your PSU or GPU. Modular PSU pinouts are not universal. Check your exact model against the list before ordering.
• 🔹 PSU END IS PCIe 8-PIN — NOT CPU 8-PIN ⚠️ The two 8-pin male ends connect to PCIe 8-pin ports on your PSU (labeled “PCI-E” or “VGA”). ⚠️ They are NOT CPU/EPS 8-pin connectors. If your PSU does not have two free PCIe 8-pin ports, this cable will not work. Do not force a CPU 8-pin into a PCIe port or vice versa.
• 🔹 63cm LENGTH + 18AWG COPPER WIRE — CLEAN ROUTING & RELIABLE POWER 25-inch (63cm) length provides generous slack for routing behind the motherboard tray in mid-tower cases, replacing the bulky NVIDIA 4-to-1 adapter. 18AWG copper wire (verify actual AWG before listing) supports the power demands of RTX 3080/3090 FE within cable ratings. Sleeved design improves build aesthetics.
• 🔹 REPLACES NVIDIA 4-TO-1 ADAPTER — DIRECT PSU CONNECTION Instead of using the included NVIDIA “octopus” adapter (which splits a 12-pin into four 8-pin connectors), this cable connects directly from two PCIe 8-pin ports on your compatible PSU to the GPU’s Mini 12-pin port. This reduces connector count, improves airflow, and simplifies cable management. Still a passive adapter — does NOT increase PSU wattage.
• ⚠️ IMPORTANT SAFETY NOTES: NOT for RTX 40 Series / 12VHPWR (16-pin). Only for RTX 30 FE (12-pin). Only for listed EVGA/Seasonic models. Unlisted PSUs may cause hardware damage. PSU ends are PCIe 8-pin, NOT CPU 8-pin. Ensure both 8-pin and 12-pin connectors are fully seated with latches engaged. Partial insertion can cause overheating/melting. Avoid sharp bends at the 12-pin connector. Route the cable with a gentle curve. Power off and unplug PSU before installation. Never force connectors. If you smell burning or see discoloration, disconnect immediately.