(Pack of 2) 426-02-063-0001 426-02-063-0002 Table Inserts (Diameter: 2.5 in, Thickness: 0.1 in) Compatible With Delta 14 Part/Rockwell 14" Band saws and 24" Scroll saws

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• Replace Part: 426-02-063-0001 426-02-063-0002
• 2 & 1/2" X .100 thick Please measure your sawmill recess to ensure proper mounting location. They fit Delta, Rockwell, some Jet, Ridgid, Grizzly and other imports
• Compatible With Delta 14" (LBS-56) and most import bandsaws: 8-243、28-299、28-300、328-03、28-306、28-345、28-348、28-350、28-365、28-366、 28-380、28-245、28-248、28-254、255、28-262、28-263、28-269、28-270、28-275、28-278、28-280、28- 283、28-285、28-290、28-293
• Installation Note: First make sure the edges of the holes are free of dirt. If the table alignment pins are not tight or are missing, usually the blade mounting slots will close up a bit over time, which slightly reduces the diameter of the insertion holes. I tap a flathead screwdriver into the blade mounting slot a bit to wedge it open. This should diffuse the insert hole enough to fit it
• Our goal is to give users a good shopping experience, if you have any problems in shopping and use, please email us in time, our staff will help you solve within 24 hours