Manolindox Upgraded 0.25MM AD5X Quick-Detachable Nozzle for Flashforge AD5X Hotend Kit, Support 300°C High Temperature and 600mm/s Print Speed, with Silicone Socks/Nozzle Cleaning Kit

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• Compatibility: 0.25MM quick-detachable nozzle for Flashforge AD5X 3D printer. compatible with various mainstream filaments such as PLA, PETG, ABS, TPU and nylon. NOTE: The upgraded nozzles are only suitable for AD5X printers manufactured after May 31, 2025. when installing on an older version of the printer, you will need to upgrade the screws and heat sink (the new upgraded nozzle has physical differences from the old connector, and forced installation may cause deformation of the hot end module)
• Upgrade AD5X Hardened Nozzle: The all-metal design is heat-resistant up to 300°C, and the innovative neck heat dissipation copper block can shorten the cooling time. during high-speed printing, the material extrusion speed is accelerated to avoid poor interlayer adhesion caused by insufficient cooling. the efficient heat dissipation copper block supports higher printing speeds and can quickly solidify even during high-speed movement
• Application: When the extrusion flow fluctuations of your for Adventurer 5X Hotend Kit, breaks or leaks, or when there are obvious traces, layering, layer disconnect or surface roughness of the print, usually it is because the nozzle is aging and the dimensional deviation caused by long-term wear affects the accuracy. it needs to be replaced in time to avoid affecting the printing stability
• Installation and Matching: The for AD5X quick-release nozzle kit is easy to install and allows for direct replacement. you will receive 1Pcs 0.25mm nozzle, 5Pcs cleaning needles, 2Pcs nozzle brushs and silicone socks. this set is fully functional, allowing you to deal with various problems and enjoy the fun of DIY. if you have any questions, please leave a message on Amazon
• Notice: Compatible with all functions of AD5X printer. before replacing the AD5X nozzle, you need to make sure there is no filament left in the nozzle, otherwise, the remaining chilled material may make replacement more difficult or cause damage to the tool. after replacement, please recalibrate the parameters, keep the bed in level and do a test print