Hygger 2120GPH Quiet Submersible and External 24V Water Pump, with Controller (30%-100% Settings), Powerful Return Pump for Fish Tanks, Aquariums, Ponds, Fountains, Sump, Hydroponics (65W, 18ft)

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• 🐠【Demension & Specifications】Input voltage: 100-240V 50/60HZ. Output voltage: DC 24V. Pump Dimension(LxWxH): 7.7 x 4.1 x 6.4 inch. Cord length from the pump to controller is 9ft, the power cord length is 9.9ft. Wattage/flow/head: 65W/2120GPH/18ft head. Please look to the size chart for other models
• 🐠【 Auto Shut Off When No Water】 Plug the power to turn this water pump on, unplug the power to turn it off. It is protected in case there's no water, the pump will auto shut off when no water is sensed or water gets too low. Comes with 2 kinds of removable water intake screens,1 for normal water level and the other for low water level (higher than 0.8inch)
• 🐠【Adjustable Flow Speed】This aquarium water pump has an external Led display controller, with 71 flow speed settings, you can control the flow rate from 30% to 100% of the top speed flow. 3 buttons on the controller: "Up" "Down" "Pause"
• 🐠【Internal & External Use】 Hygger dcp water pump can be ran externally or be submerged. Please note the controller is not waterproof, must be placed indoors.The water pump inlet and outlet ports with standar size threads, it comes with screws, o rings, pipe connection fittings.You can connect 1", 3/4", 1-1/2", 1-1/4" pipes to the pond pump
• 🐠【Durable Water Pump】Wear-resistant ceramic shaft and magnetic drive makes this water pump a long service life. No copper element, can be used for fresh water or salt water. Need 10ft extension cord for the controller and pump, please go for ASIN B08CB69DSF