Fms RC Airplane Reflex V3 Mini Gyro Flight Control System for Remote Control Aircraft Plane Reflex V3 Stable Flight Controller

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• Utilizes a high-speed 32-bit ARM processor onboard.
• Sensors: Solid-state 3 axis gyro and 3 axis accelerometer.
• Automatically recognizes SBUS/PPM/PWM systems, compatible with all radio systems with 4 channels or above. If you are using a 4 channel transmitter, use the included jumper to select between flight modes by plugging it into the “gyro mode input” port.
• Easy operation- the Reflex system is programmed specifically for the aircraft it is connected to. No further programming is needed.
• The user only needs to connect their receiver to the gyro and setup the aircraft normally. Please read the enclosed manual carefully before using the product.
• Reflex V3 version can be connected to a mobile app via Bluetooth after power-on, unlocking parameter setting functions (available for non-FMS models as well).
• User-friendly operation: Synchronize required parameters through computer software or mobile app, connect Reflex V3 to the receiver, and set up the corresponding channels and directions on the remote controller. (Note: Parameter setting functions are only supported by the mobile app.)