ECCPP 4PCS 5x100 to 5x114.3 Wheel Spacers Adapters Hubcentric 5x100 to 5x4.5 1inch 5 lug Fits for 1990-2014 for Subaru Legacy| 2000-2014 for Subaru Outback| 2016-2023 for Subaru Crosstrek

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• 【COMPATIBLE WITH】5 LUG Wheel Adapter 1 inch Fits for 2003-2006 for Subaru Baja| 2000-2013 for Subaru Outback;NEED TO INSTALL AFTERMARKET WHEEL IN 5x4.5 BOLT PATTERN,NOT FIT Stock Rims.
• 【SPECIFICATIONS】CHANGE YOUR VEHICLE BOLT PATTERN FROM 5x100 to 5x114.3 Wheel Spacers Adapters with Thickness:1" or 25mm;Vehicle Bolt Pattern:5x100mm;Wheel Bolt Pattern:5x4.5 or 5x114.3mm;Thread Pinch:12x1.25;Inner Diameter:56.1mm
• 【BENEFITS for CAR】Our 25mm Wheel Adapters hub centric 5 lug CHANGE YOUR BOLT PATTERN FROM 5x100 to 5x4.5.Provide your car with an aggressive appearance while adding safety and stability to your car. It can effectively increase the wheelbase of the car, balance the center of gravity of the body, reduce body deformation, and solve the problems of drifting and tilting when the car is driving at high speeds and cornering at high speeds
• 【MANUFACTURE】5 lug Wheel Spacers Adapters Hubcentric Made from the great true T-6 billet aluminum,with heat treated and hardened 10.9 grade bolts pre-installed.Exceptionally sturdy and lightweight compared to steel spacer
• 【VERIFY FITMENT】hub centric wheel adapters 5 lug Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12x1.25mm threads; 2) You have more than 1 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 56.1mm,advise torque specs at 70-80 Ft/Lbs
• 【INSTALLATION NOTES】The use of a thread lock adhesive is encourage for installing.The back of the wheel must sit flush on the wheel spacers/adapter.The studs on the vehicle cannot stick past the face of the the wheel spacers/adapter. If they do,you may need to modify by grinding/trimming