ECCPP 4PCS 1" Change Bolt Pattern from 5x100 to 5x114.3(5x4.5) Conversion Wheel Adapters 5 Lug Fit for 1986-2005 for Toyota for Celica| 2003-2011 for Toyota Corolla-NOT FIT Stock Rims

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• 【FITMENTS INCLUDE】fit for 2001-2010 for Pontiac Sunbird| 1995-2000 for Chrysler PT Cruiser| 1989-1995 for Chrysler Sebring |1996-2000 for Dodge Stratus| 1989-1995 for Dodge Neon| 1982-2002 for Dodge Caravan| 1995-2002 for Dodge Spirit
• 【SPECIFICATIONS】 NEED TO INSTALL AFTERMARKET WHEEL IN 5x4.5 BOLT PATTERN,NOT FIT Stock Rims.Thickness:1" or 25mm;Vehicle Bolt Pattern:5x100mm;Wheel Bolt Pattern:5x4.5 or 5x114.3mm;Thread Pinch:12x1.5;Inner Diameter:64.1mm;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
• 【KEY FUNCTIONS】Our 1" 5 lug Wheel Adapters CHANGE YOUR BOLT PATTERN FROM 5x100 TO 5x4.5.Provide your car with an aggressive appearance while adding safety and stability to your car. It can effectively increase the wheelbase of the car, balance the center of gravity of the body, reduce body deformation, and solve the problems of drifting and tilting when the car is driving at high speeds and cornering at high speeds
• 【PERFORMANCE ENHANCEMENT‌】The 25mm WHEEL Adapters 5 lug are made of high-quality forged 6061-T6 billet aluminum alloy and CNC precision machining, and the surface anodized coating can also protect the metal surface from environmental erosion under extreme conditions.CNC automatic processing ensures high accuracy and stability. These forged 6061 t6 aircraft aluminum wheel spacers are stronger
• 【GARAGE CHECKING】Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12x1.5mm threads; 2) You have more than 1 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 64.1mm,advise torque specs at 70-80 Ft/Lbs
• 【INSTALLATION NOTES】The use of a thread lock adhesive is encourage for installing.The back of the wheel must sit flush on the wheel spacers/adapter.The studs on the vehicle cannot stick past the face of the the wheel spacers/adapter. If they do,you may need to modify by grinding/trimming