ECCPP 2PCS change bolt pattern from 5x4.5 to 5x5 Hub Centric Wheel Adapters Conversion 1.25 inch Fits for jeep Grand for Cherokee for jeep Cherokee for jeep Wrangler JK TJ YJ-NOT FIT Stock Rims

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• 【FITMENTS INCLUDE】Fit for following vehicle hub but not use your oem(original)tires/ not use following vehicle tires, need prepare aftermarket tires in 5x5" bolt pattern instead of your vehicle rims;The hub centric Wheel Spacers adapters 5x4.5 to 5x5 Fit for 2002-2013 for Liberty |1987-2006 for Wrangler|1980-2001 for Cherokee
• 【SPECIFICATIONS】NEED TO INSTALL AFTERMARKET WHEEL IN 5x5 BOLT PATTERN,NOT FIT Stock Rims. The Wheel adapters spacers 5 lug hubcentric with Thickness:1.25" or 32mm;Vehicle Bolt Pattern:5x4.5 or 5x114.3mm;Wheel Bolt Pattern:5x5 or 5x127mm;Thread Pinch:1/2"x20;Inner Diameter:71.5mm
• 【PERFORMANCE ENHANCEMENT‌】The 1.25 wheel spacers adapters 5 lug with Hub-centric design with additional centering collar with perfect fit in mind makes the spacer function as a precise extension of the axle hub, - support and center the wheel to better resist impact loads from different road conditions and eliminate the risk of vibration.The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety,improve vehicle handling and stability, and prevent roll
• 【PERFORMANCE ENHANCEMENT‌】Our hubcentric Wheel Adapters 5x4.5 to 5x5 CHANGE VEHICLE BOLT PATTERN FROM 5X4.5 TO 5X5 ,provide your car with an aggressive appearance while adding safety and stability to your car. It can effectively increase the wheelbase of the car, balance the center of gravity of the body, reduce body deformation, and solve the problems of drifting and tilting when the car is driving at high speeds and cornering at high speeds
• 【GARAGE CHECKING】5x114.3 to 5x127 wheel adapters Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 1/2 threads; 2) You have more than 1.25 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1.25 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 71.5mm
• 【INSTALLATION NOTES】The use of a thread lock adhesive is encourage for installing.The back of the wheel must sit flush on the wheel spacers/adapter.The studs on the vehicle cannot stick past the face of the the wheel spacers/adapter. If they do,you may need to modify by grinding/trimming