DJI RS 5, Gimbal Stabilizer for Camera Canon/Sony/Panasonic/Nikon/Fujifilm, Fine-Tuning Knobs, 2nd-Gen Automated Axis Locks, Quick-Open Tripod, New Z-Axis Indicator

Overview DJI RS 5 features touchscreen subject selection with the new tracking module [1], smooth balancing from fine-tuning knobs, and direct control via the new briefcase handle [2]—all backed by faster charging and extended battery life [3]. DJI RS 5 comes in the following purchasing options: - DJI RS 5 includes the BG33 Battery Grip, RS 5 upper and lower quick release plates, Lens-Fastening Support, Quick-Open Tripod, and more. - DJI RS 5 Combo additionally includes the RS Enhanced Intelligent Tracking Module and the Electronic Briefcase Handle, enabling enhanced intelligent tracking and composition. Notes 1. Requires the DJI RS Enhanced Intelligent Tracking Module, which is available for separate purchase or with the purchase of the compatible combo. Human tracking is limited to a single subject and is not recommended in scenarios with multiple people, overlapping positions, similar clothing, exaggerated movements, or complex attire. Vehicle tracking is suitable for single-vehicle scenarios where the vehicle body is less than 30% occluded and is not suitable for fast-moving vehicles. Pet tracking is limited to a single pet and is not suitable for pets that are moving quickly or changing direction frequently. If the subject temporarily leaves the frame, intelligent reacquisition within 2 seconds is only supported when tracking a person. Data was measured in a controlled environment. Actual experience may vary depending on the environment, usage, and firmware version. 2. The briefcase handle is available for separate purchase or with the purchase of the compatible combo. 3. Requires a 65W charger supporting PD protocol and DJI RS BG33 Battery Grip. The DJI RS BG33 Battery Grip is not available for purchase in India. Charging speed and battery runtime improvements are based on a comparison with DJI RS 4 using the DJI RS BG21 Battery Grip. Data was measured in a controlled environment. Actual experience may vary. For details, please refer to the product page on the official DJI website. 4. For more details on camera and lens compatibility, please refer to the Ronin Series Compatibility Search page. 5. Sold separately. 6. Measured in a 25° C (77° F) indoor environment with the gimbal balanced in a level and stationary state until the battery level reached 3% (with the battery grip only powering the gimbal). 7. Only available for specific Panasonic and Fujifilm cameras and requires updating to the latest firmware from the camera manufacturer's official website. For more details on camera and lens compatibility, please refer to the Ronin Series Compatibility Search page. 8. Measured with a charger supporting 18W fast charging. It is recommended to use chargers supporting PD protocol. 9. No rebalancing is required for the tilt axis (front to back) and the pan axis after switching between horizontal and vertical shooting. * Requires the DJI RS BG70 High-Capacity Battery Grip for the corresponding battery standby time. DJI RS BG70 High-Capacity Battery Grip is sold separately. Data was measured in a controlled environment. Actual experience may vary. For details, please refer to the product page on the official DJI website.