ChgImposs 16" 2-Jaw Gear Puller, Heavy Duty CR-V Adjustable Reversible Bearing Puller Tool for Removal of Pulleys, Flywheels, Bearings, Gears, Brake Drums, with 3.5M 1 inch Ratchet Straps

Features: - 2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them. - This 2 jaw gear puller is made with premium heat treated steel to ensure no breakages or bend occur from the high tension experienced during pulling. - 2 jaw gear puller can be reversed to pull parts from either the inside or outside. The jaws allows for easy gripping and access to tight spaces. - The button makes it easily to change the puller into internal or external gear / bearing puller. - The bearing is detachable, and the screw can be used with adjustable length, which is convenient and quick. - With one piece 3.5M 1 inch ratchet straps, it can fix the two claws of the puller to prevent rapid release of the tool claws when disassembling the car brake drum, making it safer. Size: 16 Inch Material: Chrome Vanadium Steel Surface Treatment: Chrome plating Number of Claws: Two-claw Type: Claw Puller Product Name: Two Claws Bearing Puller Place of Application: Slide Gears / Pulleys / Flywheels / Brake Drum Package Include: 1 x 16 inch Two-claw Puller 1 x 3.5M 1 inch Ratchet Straps Safety & Operation Notes: - For heavily rusted brake drums, add nuts to the brake disc screws to prevent sudden ejection and noise during disassembly. - Secure a fixed strap between the two claws to prevent them from falling off during operation. - For completely rusted brake drums on trucks, remove rust residue with a wire brush before disassembly. - Adjust the center distance of the puller before removing bearings. - Hold the positioning wrench with your left hand and turn the screw with your right hand. - Operate slowly and avoid excessive force to prevent damage to parts or the tool.