ATRACYPART 2208613 2204945 Fuel Pump Assembly Compatible with 2013-2017 Polaris Ranger 800 6x6/ CREW/EFI/MIDSIZE, 2014-2020 Ranger 570 CREW EFI INTL, 2017-2020 Ranger 500

Ensure peak performance for your Polaris Ranger with this 2204945 Fuel Pump Assembly, designed for seamless compatibility with a variety of models, including: 2014 Ranger 800, 2013-2017 Ranger 800 6X6, 2013-2017 Ranger 800 CREW, 2013-2017 Ranger 800 EFI/ MIDSIZE. 2017-2020 Ranger 500, 2015-2017 Ranger 570, 2014-2017 Ranger 570 EFI, 2014-2020 Ranger CREW 570 EFI, 2014 Ranger 570 INTL, 2016 Ranger 570 FULL SIZE, 2015-2016 M1400 GAS, 2015-2016 Ranger ETX, 2017 Ranger 499 ETX HDPE, Installation Steps: 1. Safety First: - Disconnect the battery to prevent electrical hazards. Ensure the engine is cool and you're working in a well-ventilated area. 2. Access the Fuel Pump: - Locate the fuel pump assembly, typically under the seat or near the fuel tank, depending on the Polaris model. 3. Remove the Old Pump: - Disconnect the fuel lines and electrical connections carefully. - Unscrew or unclip the pump assembly and remove it from the fuel tank. 4. Install the New Pump: - Align the new **2204945 Fuel Pump Assembly** with the mounting points. - Secure it in place and reconnect the fuel lines and electrical connectors. 5. Test the System: - Reconnect the battery, start the engine, and check for smooth operation. Inspect for any fuel leaks around the connections. --- Maintenance Tips: - Regularly inspect fuel lines and connections to prevent leaks. - Replace your fuel filter as recommended to extend the life of the pump. - Avoid running the fuel tank empty to prevent undue stress on the pump.