ACTINTOOL Concrete Bushing Patch Repair Prepare SDS Max Bush Hammer Bit for Rotary Hammer and Polisher, Coat Removing Stone Concrete Texturing Bushing Hammer Tool

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• 【Fit with sds max rotary hammer】This 5 inch bush hammer plate is packed with a 5/8"-11 to SDS Max shank adapter, can fit with sds max rotary hammer.
• 【Fit with polisher】Taking away the adapter, the bush hammer plate can fit with 5/8"-11 spindle polisher. Working speed less than 2000 RPM
• 【Wide Use】1. Creates anti-slip finish on granite and marble 2. Remove hard coatings and overlays 3. Increase bonding effectiveness by preparing the concrete with CSP 4-5 roughness before the application of high build coating and overlays.
• 【Size】5 inch plate, total length with shank 9 inch. 3 pcs rollers on a 5 inch plate, each roller is welded with 30 teeth.
• 【Warning】Rotary mode only, no impact or hammer only mode, which can twist the adapter shank. Working speed under 2000 RPM, do not operate with too much pressure, which can stop the roller from running and break the shank. Rollers and shank are sold separately in actintool store, you can buy to replace the worned parts.
• 【Warning】Fitting with rotary hammer, this bush hammer tool only works in rotary mode, the high speed and little pressure can make it dig not so deep, the estimated profile close to CSP 2-3. It is suggested to fit with polisher, low speed ( under 1000 RPM) higher pressure can make it dig deeper close to CSP 4-5.