8141DBL Siding Lamp Mounting Blocks Kits, Outdoor Light Mounting Block with Built-in Electrical Box for 1/2 Inch (0.5") Outdoor Double 4" Siding Lap 1/2" Vertical Double Siding Lap, White, 2 Pack

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• Widely Applications: Outdoor light mounting block fit for 4 Inch height siding, 1/2 inch lap double. Siding mounting block provides for a smooth vertical mounting of light fixtures on all siding types (including T-111, Hardie Plank lap siding, and flat surfaces). The built-in electrical box design makes it very easy to install, Also makes adding new lighting to existing siding more easy with the built in electrical box.
• Easy to Install: This siding mounting kit with built-in electrical box is super easy and fast to install on Vinyl siding. 1.Drill the hole through the siding lap to put a wire through the hole outside. 2.Remove the knock-out from the electrical box and insert the cable connector into the hole. 3.Put the wire through the cable connector and mount the box up with the included couple srcews. 4.Put the outside light in place on the electrical box.
• Size Details: Vinyl siding mounting blocks size 6.9 Inch W X 10.2 Inch H. For 1/2" lap siding double 4". Please check the size data in the picture. If you find that your vinyl siding is not suitable, it doesn't matter. You can placed some caulking and then painted the blocks and molding. (𝐍𝐎𝐓𝐄:To stop water from penetrating the electrical box, you must seal the top of the box except the drainage hole on the bottom.)
• Upgrade Siding Block: The siding mounting plate is made of solid UV rated plastic, with textured and paintable white surface. You can also paint the fixture the colour you want to match the colour of your vinyl siding mounting blocks, or just leave it in its natural beige colour. Outdoor Siding Light Mounting Block For 1/2 inch double layer and 4 inch high siding, makes adding new lighting to existing siding more easy.
• Warm Tips: To stop water from penetrating the electrical box, your must caulking the top of the box except the drainage hole on the bottom. Ensure you have enough supplies to complete your projects, you can install the exterior light pn vinyl wall panel with mounting plate as needed. Siding mounting block include: 1× vinyl siding mounting block, 1× cable connectors and 4 × mounting screws.