48V POE Injector Adapter Power Supply,10/100Mbps IEEE 802.3af Compliant for Most Cisco/Polycom/Aastra/Axis/Ubiquiti IP Cameras Phones AP and More

This PoE adapter only fit for 10/100Mbps networks. Applications: IP Phone Wireless Access point devices IP Security Camera Systems Features: 1. Used for 10/100Mbps networking 2. Save you money by using an existing Ethernet line to deliver data and power. 3. Easily connect any POE supported device to a NON-PoE LAN switch port. 4. Used to connect a wireless access point, IP phone, network camera, or any POE powered device to a LAN switch. 5. Reduce Wiring Costs by powering devices through your existing Ethernet line rather than running new AC power lines. 6. You need to do is connect this iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device. 7. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems. 8. short circuit , Over Current and Over Voltage Protection, keeping your devices safe. It is also protect your products from overloads over 350mA and high voltages exceeding 52Vdc. Specifications 2 RJ45 Shielded Ethernet ports Input: 100-240VAC 50/60Hz Output: 48V 0.35A Power feed Pins: V+ 4,5; V- 7,8; Data rate: 10\100Mbps Deliver power up to about 325 feet What in Box? 1 x wall PoE injector 48V 15.4W