2 Point Bolt Mortise Lock Replacement Fits for Pella Storm Doors ONLY, 2-1/2" Handle PZ, 7/8" Backset, 7-1/4" Faceplate Screw Hole Centers, Bolts Spaced at 2-1/2", Non-Handed, Black

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• This unique 2 bolt locking mechanism fits Pella storm doors only. Not universial, please compare to your existing ones before you drop an order.
• Bolts are 2-1/2 inches apart. Deadlatch is centerd and handle PZ (center of cylinder to center of handle) is 2-1/2-inch.
• Faceplate screw holes spaced at 7-1/4 inches (Screws included).
• Helpful Tips: Do not throw away your original hardware, you may need them for the installation of your new part. Put a piece of cardboard between screwdriver and door to prevent marring or chipping paint.
• Lock Removal: There are 4 spring loaded tabs that hold the Mortise lock in the storm door, even when faceplate screws are removed. Use small pry bar or stiff putty knife and the spring loaded tabs will retract when removing.
• Cylinder Removal: The cylinder screw needs to be removed to take the keyed cylinder out of door. The cylinder has a cam in the center that rotates to lock and unlock the door. The cylinder only comes out when the cam is in the proper position. To Remove cylinder turn thumb turn slowly and pull, when the cam is in alignment the cylinder will come out.
• Replacement cylinder must be made by Pella. Their cylinder knob/key turns 270 degrees before the cam starts to turn.