2-Pack Kerosene Heater Wick Replacement, 95x2.5x180mm Fiberglass Cotton Blend, Fits Most Portable Kerosene Heaters, Oil Lamps, Camping Stoves – Direct Replacement, Long Burn Time, Easy to Install
Ended
-
Won For
$1
Description
Stop Dealing with a Smoky, Inefficient Heater You bought a kerosene heater for reliable heat, not for the haze and the smell. A tired, old wick robs your heater of its performance. It smolders, it stinks, it wastes fuel, and its uneven burn leaves you with cold spots in the room. This isn't just another replacement wick. It's an upgrade to your heater's core component, designed to tackle those exact problems. Here's what changes when you install our wick: The air in your room feels cleaner because more of the kerosene actually burns. The tight glass fiber matting at the top creates a stable burning surface, while the thick cotton base below ensures a steady fuel supply. The result is a visible reduction in the hazy smoke and that sharp kerosene odor that can linger for hours. You get more usable heat from your fuel tank. When combustion is more complete, you convert more fuel into warmth, not smoke. This means your heater runs longer on the same amount of kerosene, and you make fewer trips to refuel or buy supplies. Your heater works like it's supposed to - simply and reliably. This wick is precision-cut to match standard 95mm diameter heaters. The installation takes moments: pull out the old, press in the new, let it absorb fuel, and light it. There's no complicated adjustment. You'll notice a steadier, brighter flame almost immediately. The 2-pack is the smart choice. One wick can last a season or more with regular use, but having a spare means no frantic searches when the first one eventually wears thin. Keep the extra in your heater's storage compartment, your emergency kit, or your camping gear. Built for Where You Need Heat: In your garage or workshop during winter projects. In your basement or living room during a power outage. In your hunting cabin, RV, or tent on a cold night. As a backup heat source for your home. Key Details: Material: Woven Fiberglass (Combustion Layer) & Cotton (Absorption Layer) Exact Size: 95mm (3.74") Diameter, 2.5mm (0.1") Thickness, 180mm (7.09") Length What's in the Box: 2 x Replacement Wicks Works With: Most kerosene heaters, oil lamps, and portable stoves designed for a wick of this size. A Necessary Reminder for Safe Use: Kerosene heaters consume oxygen and produce emissions. Always provide adequate ventilation by opening a window or door slightly when in use. Never leave a burning heater unattended. Check your heater's manual for specific safety instructions.
Item Details
Seller

Lots Of Auctions
Pickup Location
4801 W University Drive Suite 104
Denton, TX, 76207
Quality
Estimated Retail Price
$13.99
Buyers Premium
15%
Inventory Number
1075634072
Additional Details from the Manufacturer
This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing
brand
ShengBaiYangcolor
Whitesize
1More features
- Engineered for Noticeably Less Smoke and Smell: Our wick uses a tight fiberglass weave over a dense cotton core to promote more complete combustion. This means less unburned fuel turning into smoke and odor, so your room stays fresher and your eyes don’t sting.
- Get Two Wicks So You’re Never Without Heat: One wick fails on a cold night, and you’re left waiting. This pack gives you two identical, high-quality wicks. Install one now, keep the other nearby. It’s practical preparedness for winter, camping, or emergencies.
- Better Materials Make a Real Difference: The cotton isn’t just for show – it aggressively pulls fuel upward. The fiberglass isn’t generic – it’s woven to burn steadily. Together, they reduce wasteful “fuel flare” and give you more consistent heat from your tank.
- Designed as a Direct Fit for Popular Heater Models: Made to 95x2.5x180mm specifications. If your old wick matches these numbers, this will slide right in. Works with common kerosene heater and oil lamp brands—no modification, no guesswork.
- Swap It Out in Five Minutes, No Expertise Needed: If you can remove a used wick, you can install this one. No special tools. Just insert, let it soak for a few minutes, trim if needed (though fiberglass rarely needs it), and light. Your heater is back in service.


See the deals
Get in on the action, thousands of new items added daily. Bid and win!
Start bidding now
