16" Concrete Ring Saw, 9500W Toroidal Electric Concrete Saw Cutting Machine, Wet Cutting System, Max Cutting Depth 11.8" Electric Ring Cutter For Brick, Concrete, Marble And Rebar(9500W)

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• Electric Concrete Ring Saw: The KIWLWLAN concrete ring saw features a 6500W toroidal motor delivering 36000 r/mintorque for cutting through tough concrete, stone, and masonry efficiently, boosting productivity by 30%. for deep cuts up to 11.8 inches. Allow for quickly and smoothly cutting
• High-Strength Titanium Alloy Saw Blade: This concrete ring saw cutting machine is equipped with a 16 inches thickened titanium alloy saw blade. The blade is engineered to cut smoothly and precisely through tough materials such as concrete, brick, stone, and marble
• Dust-Free Cutting System: Includes a 16-foot (191.5-inch) water hose and an intelligent water pump which maintains a continuous water flow during operation. (95% dust suppression, 2-3x blade life). GFCI anti-shock + 1s brake; dry/wet modes for indoor/outdoor use.This system effectively cools the blade, and reduces harmful dust, protects both the operator and the environment
• Safe Operation: Press the button to start the circular saw and release the button to stop it. Main and auxiliary handles distribute weight evenly and reduce fatigue during both vertical and horizontal cuts. The built in heat dissipation maintains consistent motor temperature during long periods of use
• WARNING: Before each operating, ensure the ring saw is unplugged and manually rotate the blade to verify smooth movement. If the blade does not turn, adjusting the left-side screw until it rotates freely. Then, manually rotate the blade again to confirm that all four marked points move simultaneously. If not, adjust the right-side screw until all 4 points rotate in sync. Only after completing these checks should the tool be used. If the blade cannot rotate during operation, also can use above instruction to adjust